Table of Contents
When you go with a new roof installation, you likely want it to be as close to perfect as possible. How do you know if you didn’t get a perfect install? There are several signs indicating you have a bad roof installation.
Once you know what to look for, the damage won’t be too bad.
So, what signs should you be looking for? We have you covered. Read on to get answers!
1. Visible Roof Leaks
A visible roof leak is typically caused by improper installation of shingles or a large hole or gap in the roof. Even if the roof is fairly new, the slightest imperfection in the shingle application or any missed nail or gap can cause moisture to get inside your roof structure. This then leads to visible leaks.
It is important to inspect the roof and the surrounding areas to determine the cause of the leak, such as:
- missing or misaligned shingles
- misaligned flashings
- broken mortar joints
Once the cause of the leak is identified, it can be repaired to prevent rain and snow from leaking in. If the leak is a result of improper roof installation, you may need to contact roof contractors to properly repair or replace the damaged components.
2. Uneven or Buckling Shingles
Poor workmanship is often the main source of the problem, but there can be other factors at play. Unfilled nail holes, improper fastening of the shingles, and using the wrong type of nails can all contribute to shingles buckling.
In addition to the underlying installation issue, environmental factors can also be a cause. If there were intense winds during installation, shingles can be shifted out of place creating an uneven look.
The best way to deal with this issue is to hire a professional roofer from https://santee-roofing.com or any reputable one near you to come and inspect the roof. A certified roofer will be able to diagnose the problem and advise on the necessary repairs to restore your roof to its original condition.
3. Inadequate Ventilation and Insulation
Improperly sealed vents and openings are a common source of this issue. When air isn’t able to flow freely, warm air often accumulates, leading to heat buildup. As a result, the roof is more prone to the damaging heat of summer sun and excess snow and rain during the winter.
Over time, this can cause premature roof decay and deterioration. To prevent this problem, it’s important to make sure that all vents and openings are properly sealed. Sealing of both the underlayment and flashing should be done with a sealant that is designed to resist:
- water
- ultraviolet
- temperature extremes
If you suspect that your roof is not performing optimally, it’s best to call a trained professional to ensure that all vents and openings are properly sealed and that your roof is adequately ventilated and insulated.
Look Out for Bad Roof Installation Signs
From improper shingle installation to poorly planned ventilation systems, many potential signs indicate you are dealing with a bad roof installation. If you have any reason to believe that your roof is not up to par, get in contact with a professional right away. Don’t wait until something catastrophic occurs; act now!
Should you wish to explore more topics aside from dealing with new roof problems, visit our blog.
RELATED ARTICLE: The Different Types of Roof Tiles for Your Home
